Adafruit ATWINC1500 WiFi Breakout + uFL Connector - fw 19.4.4
Buka 24 Jam , Minggu & Hari Besar Nasional Libur
Beranda » Wireless » Adafruit ATWINC1500 WiFi Breakout + uFL Connector – fw 19.4.4

Adafruit ATWINC1500 WiFi Breakout + uFL Connector – fw 19.4.4

Ditambahkan pada: 30 January 2017 / Kategori:
Kode : E11008
Berat : 0.04 kg
Dilihat : 287 kali
Review : Belum ada review
Rp 379.000
Pesan!
Pesan melalui SMS/WA/BBM/LINE ???
Klik
DISINI !

Bagikan informasi tentang Adafruit ATWINC1500 WiFi Breakout + uFL Connector – fw 19.4.4 kepada teman atau kerabat Anda.

Toko Jual Adafruit ATWINC1500 WiFi Breakout + uFL Connector – fw 19.4.4 Online Harga Murah Grosir/Eceran

Toko Jual Adafruit ATWINC1500 WiFi Breakout + uFL Connector - fw 19.4.4 Harga Murah

Toko Jual Adafruit ATWINC1500 WiFi Breakout + uFL Connector - fw 19.4.4 Harga Murah

DESCRIPTION

Connect your Arduino to the Internet with this fine new FCC-certified WiFi module from Atmel. This 802.11bgn-capable WiFi module is the best new thing for networking your devices, with SSL support and rock solid performance – running our adafruit.io MQTT demo for a full weekend straight with no hiccups (it would have run longer but we had to go to work, so we unplugged it). We like these so much, they’ve completely replaced the CC3000 module on all our projects.

The Adafruit ATWINC1500 WiFi Breakout uses SPI to communicate, so with about 6 wires, you can get your wired up and ready to go. Right now the Atmel-supplied library works great with Arduino Zero, and seems to work OK on Uno but may not work on other Arduinos. You can clock it as fast as 12MHz for speedy, reliable packet streaming. And scanning/connecting to networks is very fast, a few seconds.

This module works with 802.11b, g, or n networks & supports WEP, WPA and WPA2 encryption. You can use it in Soft AP mode to create an ad-hoc network. For secure client connections, there is TLS 1.2 support in firmware 19.4.4!

Since this is our new favoritest SPI-protocol WiFi module we’ve decided to make a little breakout for it. The breakout comes with level shifting on all the input pins so you can use it with 3V or 5V logic. A 3.3V voltage regulator that can handle the 300mA spikes lets you power from 3-5.5VDC. There’s also 3 LEDs that you can control over the SPI interface (part of the library code) or you can have controlled by the Arduino library. They’ll light up when connected to an SSID, or transmitting data.

Note: This version does not come with an onboard antenna,

Comes with a stick of header you can solder on, to plug into a breadboard and a set of tutorials & code so you can follow along! learn.adafruit.com/adafruit-atwinc1500-wifi-module-breakout



Kami siap melayani pengiriman barang ke kota-kota besar seluruh INDONESIA, meliputi Jakarta, Depok, Tangerang, Bekasi, Surabaya, Gresik, Bandung, Medan, Semarang, Magelang, Yogyakarta, Surakarta, Solo, Jember, Palembang, Makassar, Batam, Pekanbaru, Bandar Lampung, Malang, Padang, Denpasar Bali, Samarinda, Serang, Banjarmasin, Ujung Pandang, Palangkaraya, Banjarbaru, Bontang, Tasikmalaya, Tarakan, Pontianak, Kendari, Balikpapan, Jambi, Bima, Manado, Mataram NTB, Kupang NTT, Jayapura, Sorong, Ternate, Gorontalo, dll. Dan di kota-kota pelosok yang berada di pulau Sumatera, Jawa, Kalimantan, Sulawesi, Bali, Nusa Tenggara, maupun Papua.

Best Regards,
Toko Jual Komponen Online www.PusatKomponen.com

Produk Terkait Adafruit ATWINC1500 WiFi Breakout + uFL Connector – fw 19.4.4

Mungkin Anda tertarik dengan produk terbaru kami.

Sidebar Kiri
Kontak
Cart
Sidebar Kanan