Toko Jual DFRduino Nano V3.0 (Arduino Nano Compatible) Murah
Buka 24 Jam , Minggu & Hari Besar Nasional Libur
Beranda » Arduino » Board » DFRduino Nano V3.0 (Arduino Nano Compatible)

DFRduino Nano V3.0 (Arduino Nano Compatible)

Ditambahkan pada: 14 February 2017 / Kategori: ,
Kode : A03005
Berat : 0.08 kg
Dilihat : 600 kali
Review : Belum ada review
Rp 129.000
Pesan!
Pesan melalui SMS/WA/BBM/LINE ???
Klik
DISINI !

Bagikan informasi tentang DFRduino Nano V3.0 (Arduino Nano Compatible) kepada teman atau kerabat Anda.

Toko Jual DFRduino Nano V3.0 (Arduino Nano Compatible) Online Harga Murah Grosir/Eceran

Toko Jual DFRduino Nano V3.0 (Arduino Nano Compatible) Harga Murah

Toko Jual DFRduino Nano V3.0 (Arduino Nano Compatible) Harga Murah

Toko Jual DFRduino Nano V3.0 (Arduino Nano Compatible) Harga Murah

INTRODUCTION

The DFRduino Nano USB Microcontroller V3.1 (ATMega 328) is a breadboard ready version of the Arduino mini with integrated USB. The Nano has everything that the Diecimila has (electronically) with more analog input pins and an on-board +5V AREF jumper. The Nano automatically senses and switches to the higher power supply, so there is no need for a power select jumper.

The nano’s pin layout works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other). The DFRobot DFRduino Nano USB Microcontroller V3.1 (ATMega 328) can be powered via the mini-B USB connection, 6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Version History
v3.0 – improved the analog port pin mapping to be compatible with original Arduino Nano

FEATURES
Automatic reset during program download
Power OK blue LED on the bottom
Green (TX), red (RX) and orange (L) LED
+5V to AREF jumper
Auto sensing/switching power input
Small mini-B USB for programming and serial monitor (cable not included)
ICSP header for direct program downloads
Power OK blue LED on the bottom
Standard 0.1 spacing DIP (breadboard friendly)
Manual reset switch

SPECIFICATION
Microcontroller: Atmel Atmega328-20AU
Operating Voltage (logic level): 5V
Input Voltage (recommended): 7-12V
Input Voltage (limits): 6-20V
Digital I/O Pins: 14 (of which 6 provide PWM output)
Analog Input Pins: 8
DC Current per I/O Pin: 40 mA
Flash Memory: 32 KB (of which 2KB used by bootloader)
SRAM: 2 KB
EEPROM: 1 KB
Clock Speed: 16 MHz



Kami siap melayani pengiriman barang ke kota-kota besar seluruh INDONESIA, meliputi Jakarta, Depok, Tangerang, Bekasi, Surabaya, Gresik, Bandung, Medan, Semarang, Magelang, Yogyakarta, Surakarta, Solo, Jember, Palembang, Makassar, Batam, Pekanbaru, Bandar Lampung, Malang, Padang, Denpasar Bali, Samarinda, Serang, Banjarmasin, Ujung Pandang, Palangkaraya, Banjarbaru, Bontang, Tasikmalaya, Tarakan, Pontianak, Kendari, Balikpapan, Jambi, Bima, Manado, Mataram NTB, Kupang NTT, Jayapura, Sorong, Ternate, Gorontalo, dll. Dan di kota-kota pelosok yang berada di pulau Sumatera, Jawa, Kalimantan, Sulawesi, Bali, Nusa Tenggara, maupun Papua.

Best Regards,
Toko Jual Komponen Online www.PusatKomponen.com

Produk Terkait DFRduino Nano V3.0 (Arduino Nano Compatible)

Mungkin Anda tertarik dengan produk terbaru kami.

Sidebar Kiri
Kontak
Cart
Sidebar Kanan